Overview
The Princeton Applied Research Model 616A Electrode Rotator is a high precision, low mass rotator that performs well with virtually any potentiostat. When connected to Princeton Applied Research electrochemical instrumentation, it uses control lines to give you remote start/stop and speed control. Using the convenient control panel and input jacks you can operate the model 616 easily for either manual or automated experiments.
Standard features include:
- Front panel speed controls
- Protective enclosure
- Remote analog speed control (input is summed with front panel settings)
- Front Panel and remote (TTL) on/off switching (using Princeton Applied Research stir-control signals)
- Remote analog output for speed verification
- Integral ring-stand for convenient cell mounting
For versatility, a variety of electrode assemblies are available to perform a wide range of experiments, including:
- High precision corrosion measurements
- Ultra-trace analytical determinations
- Automated Levich Plots
- Hydrodynamically-modulated voltammetry
- Cyclic stripping voltammetry
Specifications |
|
Power |
115V AC or 230V AC, 50-60Hz, factory connected |
Weight |
14lbs |
Operating Temperature |
10°C to 40°C |
Control Unit Dimensions |
11 3/8” W x 10 1/8” D x 5 ¾” H |
Base Dimensions |
11” W x 15” D x 3/4” H |
Motor |
Permanent magnet DC, ironless rotor |
Motor Power Supply |
+24V dc Nominal |
Speed Control |
Closed loop servo-system. Temperature compensated tach generator mounted on motorshaft, providing rotational speed information |
Speed Range |
100RPM to 8,000RPM |
Precision |
Better than ±1% |
Accuracy |
Better than ±3% |
Controls |
On/off switch, push button potentiometer control speed |
Motor Stop |
TTL level of user-selected polarity
|
|
Options
Quick Change Disk Electrodes |
Model Number |
Disk Electrode Assembly Disk Installation Tool
|
RDE001 RDE002 |
Quick Change Cylinder Electrodes |
|
Cylinder Electrode Assembly
|
RDE0011 |
Permanent Disk Electrodes |
|
Platinum Electrode Gold Electrode Glassy Carbon Electrode
|
RDE004 RDE005 RDE008 |
Cell Top |
|
For the part number K0060, k0062, and K0064
|
RDE0010 |
Polishing Kit |
|
For polishing electrodes |
K0015
|
|
Comments are closed.