Overview:
The LAND LSP-HD represents the latest generation of LANDSCAN Infrared Linescanner products. Scanning performance of 1000 data points at up to 150Hz sets a new benchmark in terms of process imaging definition. An Ethernet data connection straight from the sensor head removes the requirement for a separate processor whilst the adoption of Power over Ethernet technology (PoE) means all electrical connections are made with a single insustrial Ethernet M12 connector. The LAND LSP-HD Infrared Linescanner is designed to operate in harsh operating environments and an identical form factor to it's predecessor, the LSP means that compatibility with all existing mounting hardware is maintained. Temperature ranges specially selected to suit a wide range of industrial applications combined with market leading performance, improved simplicity and competitive pricing make the LSP-HD Infrared Linescanner the premier choice forinfrared process imaging. |
Temperatures | |||
---|---|---|---|
Low Temperature (C): | 20 | High Temperature (C): | 1500 |
Low Temperature (F): | 68 | High Temperature (F): | 2732 |
Technical Details |
---|
LAND LSP-HD Infrared Linescanner Head
Scan Angle | 80° (software adjustable to 40°) |
---|---|
Scan Speed | 10 – 150Hz (user adjustable in 1Hz increments) |
Number of Samples | 1000 samples |
Connection | Industrial Ethernet via M12 Connector |
Signal Processing | Up to 14 user configurable zones with min / max / average / quantile / average threshold Alarms based on the 14 zones |
I/O | PoE enabled TCP/IP Industrial Ethernet |
Ambient Temperature (Specified) | 5 to 60°C / 41 to 140°F |
Ambient Temperature (Operating) | 5 to 70°C / 41 to 158°F |
Dimensions (w x h d) | 206 x 209 x 100mm / 8.1 x 8.2 x 3.9 in |
Laser | Class 2, maximum output 1.0mW at 635nm, IEC60825-1:2001 Indicating scan plane and extent |
Environmental | IP65 |
Applications:
Industry | Application | Recommended Scanner |
---|---|---|
Cement | Rotary Kilns, Conveyors, Dryers | LSP-HD 6 |
Conveyors | Cement, Asphalt, Coke | LSP-HD 6 |
Glass | Floatline, Automotive, Holloware, Bending, Toughening/Tempering, Annealing, Solar Panels | LSP-HD 5 |
Iron & Steel |
Hot Strip Mill – Roughing Mill Entry/Exit, Coil Box, Edge Heaters, Continuous/Multi-Strand Caster Hot Plate Mill – Roughing Mill Entry/Exit, Hot Leveller Hot Beam Mill – Beam, Beam Caster, Jumping Beam Detection Reheat Furance Exit, Rod & Wire |
LSP-HD 1 |
Hot Strip Mill – Cooling Section Hot Plate Mill – Run-out Table Continuous Annealing Line – Top of Snout before Zinc Pot Annealing Furnaces galvanizing & Galvanneal Lines |
LSP-HD 2 | |
Torpedo Cars, Ladle safety, Coated Steel galvanizing Line (top Roll Position) |
LSP-HD 6 | |
Paint Coating Lines | LSP-HD 7 | |
Non-Wovens | Non-Wovens (Paper Rolls, Webs) | LSP-HD 6 |
Plastics | PVC, Polycarbonates, Polypropylene, Polyethylene, PET, Cellulose Acetate and Polystyrene, Thin Plastics, Thermoforming | LSP-HD 7 |
Plastics Extruders, Thermoforming | LSP-HD 6 | |
Other Industries | Cold Rolling, Coating Processess, Building Products | LSP-HD 6 |
Comments are closed.