They also enable the monitoring of operating temperatures of mechanical and electrical plants or production equipment without removing the equipment from the service. Any temperature variation noticeable in whatever kind of system device should show critical overheating conditions which may cause malfunctioning to the device itself. They are also useful to measure product temperatures during manufacturing, to spot problems before they reduce quality or cause production downtime.
Optical System
The optical system consists of a high quality lens which brings the infrared energy to the detector; a filter and a field stop which defines the visual cone and the minimum target dimensions. The detector is placed at the focal point of the optical system. No focussing operations are required.
The high contrast custom LCD display indicates the actual temperature value and shows the operative mode selected. The display backlight is automatically switched on to allow easy reading in poor light conditions.
Green Laser option available
The green laser pointer helps the operator to better view the laser pointer when the target temperature is higher than 1000°C.
TTS – True Target Size
A dual laser pointer define at different distances the true target dimension. This unique and innovative system go over the limits of the old crossed laser pointer based system. TTS really guarantees the measuring of the true area diameter along all the optical path.
Adjustable Emissivity
IRtec P is equipped with an emissivity adjustment from 0.10 to 1.00 directly through keyboard. The instrument includes a typical emissivity materials reference table.
Model No. |
Temperature Range |
Spectral |
Target Spot |
D/S |
IRtec P3000+ |
+550 °C to +3000 °C |
0.9 μm |
SF: 5mm @ 1000mm 0.20" @ 3.4" |
200:1 |
LD: 50mm @ 10mm 2.0" @ 394" |
200:1 |
Comments are closed.