DRUCK-Temperature & Pressure Transmitters (Model: PTX 400)

349
2063
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

 The PTX 400 series of pressure, temperature and combined pressure/temperature transmitters has been specifically designed for long term use in subsea locations. It enables accurate process measurements to be made directly on subsea wellheads and production manifolds. The sensor design is based on API performance requirement PR2 and product specification level PSL3.

 The PTX 400 utilises micromachined piezo resistive silicon pressure measuring technology continually developed and proven by GE Druck for 30 years. In addition, precision temperature measurement capability is provided by a fully integrated high performance platinum resistance type sensor.

Features

PTX 400 Series Component Diagram

P1GE’s propriety and extensively field proven piezo-resistive silicon technology for pressure measurement and PT100 technology for temperature measurement available in single and dual (redundant) configurations. Measuring elements located close to the end of the flush probe design providing dynamic response whilst eliminating blockage potential where waxing or hydrate formation could exist within the process.

  • Calibrated Pressure Ranges up to 15,000 psi/1035 bar
  • Total Pressure Accuracies up to +/-0.025% FS
  • Temperature Ranges over –46 to +180ºC
  • Total Temperature Accuracy +/-0.2% FS
  • Qualified for operation down to -70ºC for cold start up gas wells

P1Customer length specified probe length, compliments the sensor’s modular design and construction supporting quick product lead-time for short cycle projects

P1Broadest selection of mechanical interfaces – Duplex/Super Duplex with Alloy 625 Inlay or all Alloy 625 construction 

  • flange free versions available

P1Single or Dual (Redundant) electronics set back from the process temperature for increased life and improved stability.

  • Analogue and digital outputs available

P1Qualified to 4500m/+14,500 ft seawater depth the sensor design includes a flexible connection interface to suit your requirement 

  • Diver, ROV, MkII in single or dual (redundant configuration)

Applications

Subsea Production Systems (SPS)

PTX 400 Series Pressure and Temperature Sensor MountedPTX 400 Series Pressure & Temperature sensor mounted on a subsea production tree

  • Sensor performance and reliability is paramount when it comes to monitoring critical Pressure & Temperature measurements within the SPS, whether that be wellbore fluid on production trees ( e.g.choke, annulus), injection tress to promote formation flow from the well or managing the well fluid flow back through the manifold to the riser.  The PTX 400 series was designed and qualified specifically to meet these key measurements within the SPS and to maintain operation throughout the projected life of the field development.
  • The standard 10kpsi (15kpsi proof) sensor for 10k trees is mated to the tree/manifold via an Alloy 625 process wetted API 6A flange.For HPHT developments a 15kpsi (22,500 psi proof) API 6A flange is available employing GE’s propriety Silicon-on-Insulator (SOI) technology.The SOI technology, originally developed for aerospace applications exceeding +250ºC where traditional piezo-resistive technologies are known to be unstable at high temperatures enables the PTX 400 to function without any degradation in sensor performance, stability or product life where HPHT well fluid temperatures can reach +180ºC It’s all electron beam welded construction by ASME IX qualified weld operators ensures integrity within the compact product design for operation down to 4500 meters meets the demands of even the deepest ultra deep water installations.
  • Analogue (4-20mA/20-4mA) or Digital (Modbus or SIIS Compliant Fault tolerant CANbus) outputs are available in single or dual pressure and/or temperature configurations providing complete flexibility for interfacing with the Subsea Control Module (SCM) via single or dual penetrations using Diver-mate, ROV or Stab connector interfaces which can be supplied terminated with the connector preference of your choice as part of a turn key harness solution.

HIPPS Pressure Sensors

  • Available in a SIL rated version with a fast response analogue output the PTX 400 series is also used for pressure monitoring within a HIPPS module.

Blowout Preventer (BOP)

  • The PTX 400’s excellent performance, reliability, overpressure and pressure containment capability make the sensor ideal for wellbore fluid monitoring on a BOP Stack as a critical point measurement as part of the BOP’s control system.

Subsea Flowline Monitoring

  • Pressure & Temperature monitoring of subsea pipelines and risers. The sensor’s flush design at the end of the probe means the sensor is not susceptible to blockages caused by the possible presence of sand, wax, asphaltene and hydrate formation

Resource & Download

Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 02873000184 | DRUCK-Temperature & Pressure Transmitters (Model: PTX 400) .

Comments are closed.